Cesar Amaral
More ideas from Cesar
MQL Coolant System by rgsparber - A challenge when machining metal is to keep the cutter cool and lubricated while also removing chips. If manually machining, it isn’t too tedious to keep a cutting fluid soaked brush handy. But if you are CNC machining, it is a real pain to be tied down to the machine. Straight compressed air will remove chips and does help cool the cutter a little. Adding a coolant that also lubricates makes a huge difference.

MQL Coolant System by rgsparber - A challenge when machining metal is to keep…

Hammer Tool

Homemade planishing hammer constructed from surplus steel tubing and plate, grade 8 nuts and bolts, a foot pedal, and an off-the-shelf air hammer.

two small grinding and milling spindels - Home Model Engine Machinist

two small grinding and milling spindels - Home Model Engine Machinist

Carriage stop 2_y.jpg (49880 bytes)

Carriage stop 2_y.jpg (49880 bytes)

ER16 Collet Chuck for Unimat M12X1 Spindle by Paul Jones - I have been using my Unimat E16 collet chuck to hold my ER16 collets but this is not a good long term solution. I finally decided to make an ER16 collet from a 1

ER16 Collet Chuck for Unimat M12X1 Spindle by Paul Jones - I have been using my Unimat E16 collet chuck to hold my ER16 collets but this is not a good long term solution. I finally decided to make an ER16 collet from a 1