Mais ideias de Dionatã
IMG_0637.JPG

IMG_0637.JPG

IMG_0639.JPG

IMG_0639.JPG

This project was inspired by a friend asking me to build a go-kart for his kids...got a bit carried away. Flat-packable and incorporating a foot brake, CNC routed from plywood, mostly snap together with just a few screws. Road tested down the port hills in Christchurch, including a spectacular crash (durability testing...). Inquiries welcome on this, we would love to make a few more

This project was inspired by a friend asking me to build a go-kart for his kids...got a bit carried away. Flat-packable and incorporating a foot brake, CNC routed from plywood, mostly snap together with just a few screws. Road tested down the port hills in Christchurch, including a spectacular crash (durability testing...). Inquiries welcome on this, we would love to make a few more

This project is not for the average DIYer as it requires access to a CNC machine to cut the pattern in the ply. But if you have a very good hand and an equally good jigsaw you should have no difficulty either.  http://diyprojects.ideas2live4.com/2014/09/02/diy-knife-block/  The last option would be a good, old-fashioned fret saw but we’re guessing there are not too many of those in your tool kit :)  Would you like to have one in your kitchen?

This project is not for the average DIYer as it requires access to a CNC machine to cut the pattern in the ply. But if you have a very good hand and an equally good jigsaw you should have no difficulty either. http://diyprojects.ideas2live4.com/2014/09/02/diy-knife-block/ The last option would be a good, old-fashioned fret saw but we’re guessing there are not too many of those in your tool kit :) Would you like to have one in your kitchen?