Elya's Brass hood trim, (6) pieces in 16 gauge, .050" solid brass with finished edges as detailed below.

Elya's Brass hood trim, (6) pieces in 16 gauge, .050" solid brass with finished edges as detailed below. This order includes; FRONT-(2) pieces 1/2" x 30.2" long (30" plus .1" to hide the sides and plus .1" for the thickness of the tape behind the side pieces AND SIDES-(4) pieces 1/2" x 19.05" long (19" plus .05" for the thickness of the tape behind front piece) These will be 16 gauge, .050" thick solid brass-sheared to size, (22) 3/16" (4.73 mm) holes punched, edges worked to smooth the sharp edges left by the shears, prepped, packaged and shipped to you domestically. Hole spacing; Front from corner; 3.85", 7.5", 7.5", 7.5", 3.85" (totaling 30.2") Sides from front corner; 3.8", 5.75", 5.75", 3.75 (totaling 19.05") These will arrive with protective, peel off, pvc film on both sides to preserve the factory finish. We make the front piece .1" longer than the hood measures so the side pieces can tuck in behind the front and not be seen from the front and .1" longer to allow for the thickness of the tape. We will make the side pieces .05" longer than the sides of the hood measure to allow for the thickness of the tape. Customer to confirm the exact measurements of the hood prior to our beginning fabrication. Gauge; 16 gauge, .050" brass DOMESTIC SHIPPING INCLUDED via USPS First Class Mail. We stock brass in the following gauges and thicknesses; 20 gauge, .032", .8128 mm 18 gauge, .040", 1.016 mm 16 gauge, .050", 1.27 mm 14 gauge, .063", 1.6 mm 1/8" thick brass, .125"-very thick, 3.175 mm We do all our own fabrication in house, so within the limitations of our equipment and the materials we stock, we can make about anything you want. Custom sizes, thicknesses & mixes availablejust ask PROUDLY MADE IN THE USA 9/19/2024