diy table saw

Collection by Rico bravo

62 
Pins
 • 
48 
Followers
Cut narrow strips with a sliding jig.  To make the jig, attach a 5-in.-long strip of wood, 1/16 in. narrower than the width of the desired rip, to the end of a 1x6 as shown. Basically you're creating a horizontal push stick. Add a handle near the end of the jig to give yourself better control as you run the jig through the saw.

Table Saw Tips and Tricks

We'll show you handy tips and techniques for using your table saw. Use these accessories to help you make clean, straight and safe cuts on your next wo

Scrub Brush Featherboards

Ripping Thin Stuff Safely. One of the issues of using a table saw safely is that many of the things intended to keep us safe don’t work well when you really need them. Ripping thin pieces on the table saw is a good example.

Ripping Thin Stuff Safely | Popular Woodworking Magazine

One of the issues of using a table saw safely is that many of the things intended to keep us safe don't work well when you really need them. Ripping thin pieces on the table saw is a good example.

Tablesaw Tenoning Jig

Shop-Made Tablesaw Tenoning Jig

If you're not prepared to pay $100 or more for a high-quality dado set, cut tenons with the workpiece held vertically on the tablesaw. You need a dependable jig for this operation.

4 Handy Tablesaw Jigs

4 Handy Tablesaw Jigs | Popular Woodworking Magazine

Unlock your saw’s full potential. by Seth Keller The tablesaw’s power and precision put it at the center of everyone’s shop. Despite this honored position, a tablesaw is mostly used for mundane…

Homemade Table Saw 4

How To Make A Table Saw - IBUILDIT.CA

How to build a table saw using parts from another one

4 Handy Tablesaw Jigs - The Woodworkers Shop - American Woodworker

4 Handy Tablesaw Jigs | Popular Woodworking Magazine

Unlock your saw’s full potential. by Seth Keller The tablesaw’s power and precision put it at the center of everyone’s shop. Despite this honored position, a tablesaw is mostly used for mundane…

The Super Sled - combines a Crosscut Sled and a Universal Tablesaw Jig - From Eagle Lake Woodworking

Super Sled - Crosscut and Miter Sled

While comtemplating ways to improve on the design of my existing crosscut sled, I started to focus on the concept of combining this sled with the features of Wood Magazines Universal Tablesaw Jig. I spent a lot of time modeling the new Super Sled in <a href="/post/What-program-do-you-use-for-the-Animations-in-your-Videos.aspx" target="_blank" title="Learn More about Sketchup">Google Sketchup</a> and I feel I have come up with one of the most versatile crosscut / mitering sleds around. When…

Shop-Made Wide Adjustable Featherboard - by Bricofleur @ LumberJocks.com ~ woodworking community

Shop-Made Wide Adjustable Featherboard

I want to share with you how I made this wide adjustable featherboard from a 9’’ by 12’’ pine scrap. As shown, I cut one end at 30° at the table saw using the miter gauge then I drew a parallel line two inches from this cut. I use a plunge router ...

5 Push Sticks

Free projects, vector patterns, 3D models, books, software

In front of you, there are drawings that will allow you to make several variants of push sticks (notched push sticks and shoe push sticks).

Multitasking Tablesaw Sled

Multitasking Tablesaw Sled

Inserts prolong the life of this jig.

A Quick Jig for Ripping Thin Strips

A Quick Jig for Ripping Thin Strips

One solution to this problem is the jig shown above right. It's just a block screwed to a runner that sits in the saw's miter gauge slot.

A tablesaw jig for quick & easy 45 degree cuts.  I'm a big fan of re-using stuff. I built this entirely from the pre-renovation kitchen counter in our last house.  I tend to hang onto wood.  You just never know when it will come in handy.  Whoops, forgot to put the "dark walnut" stain on....

A tablesaw jig for quick & easy 45 degree cuts. I'm a big fan of re-using stuff. I built this entirely from the pre-renovation kitchen counter in our last house. I tend to hang onto wood. You just never know when it will come in handy. Whoops, forgot to put the "dark walnut" stain on....

1 of 5: How To Make Your Own Table Saw Fence Guide Rails & The VerySuperCool T-Square Fence

1 of 5: How To Make Your Own Table Saw Fence Guide Rails & The VerySuperCool T-Square Fence

You can buy the t-square that is featured in this video from http://www.verysupercooltools.com

Hold-down rollers

Hold-down rollers for TS - RIDGID Forum | Plumbing, Woodworking and Power Tools

A great place to discuss Woodworking in general.

Panel-Cutting Sled Woodworking Plan

Panel-Cutting Sled Woodworking Plan